Laser-cutting, plasma-cutting and hydroabrasive and cutting machinery
In stock
Plasma cutting of sheet metal URM-1700W Compact PlasmaStanok plasma cutting "URM-1700W Compact Plasma» for automated via CNC air plasma cutting submerged or semi-submersible in water vannu.Bazovy set URM-1700W Compact Plasma include: · The size of the working area 1700 x 3000 mm...
Group: Plasma cutting machines
In stock
The machine of plasma cutting URM-1700 Plasma is intended for the air and plasma cutting of the metal shipped or semi-shipped in a water bathtub automated by means of ChPU.
The specialized computer of cutting of metal is installed on the machine. It carries out cutting of metal according to...
Group: Plasma cutting machines
In stock
The Auto-Refre system provides convenience due to automatic control of an arch on duty when cutting the metal gauze or several metal details.
Automatic recognition of expendables allows to define type of the established expendable material and regulates gas pressure for optimization of...
Group: Air - plasma are sharp metals devices
In stock
Productivity of cutting of soft steel
The scheme Auto-Line™ is automatically connected to a single-phase source of voltage of 115-230 V ~, with a frequency of 50/60 Hz, without the need for removal of covers for reconnection of the power supply.
X-CASE™ suitcase excellently protects installation...
Group: Air - plasma are sharp metals devices
In stock
The electronic controller of an arch on duty automatically operates a control chain for cutting of the metal gauze without switching of a torch, thereby increasing productivity and service life of a tip.
Two supply voltages: 115 or 230 V ~ with the patented protection against the wrong position of...
Group: Air - plasma are sharp metals devices
In stock
The powerful built-in compressor with the piston drive used in the industry provides long service life and an excellent air stream.
The solid-state scheme of a direct current provides a dense arch at current of 12 amperes for continuous high-quality cutting of steel up to 4,2 mm thick.
The...
Group: Air - plasma are sharp metals devices
In stock
Spectrum 875 Auto-Line allows to be connected automatically to any single-phase or three-phase power supply with tension of 208-575 V without manual connection that provides usability in any conditions. The standard Spectrum 875 model works only from the single-phase power supply with tension of...
Group: Air - plasma are sharp metals devices
In stock
Installation of air and plasma cutting Jasic CUT 60 proved long ago as the convenient and practical equipment which allows to carry out high-quality processing of metal surfaces and preparation of necessary details. The obligatory service equipment for such practical and simple installation in...
Group: Air - plasma are sharp metals devices
In stock
Installation of air and plasma cutting Jasic CUT 120 is a professional equipment which allows to carry out a necessary preparatory work. Air and plasma cutting possesses a big number of advantages. She does not demand use of big physical force. By means of such unit it is easy to carry out cutting...
Group: Air - plasma are sharp metals devices
In stock
Installation of air and plasma cutting Jasic CUT 40 - the special industrial equipment for fast and high-quality cutting of different metal materials and designs. This model has several very considerable advantages: simplicity of management and economy of working materials. For full work the unit...
Group: Air - plasma are sharp metals devices
In stock
Device of air and plasma cutting Jasic CUT-100. Reliable and professional tool.
Characteristics of the machine:
Max. thickness of a cut:
30 mm
Plasma generators
Network tension
380B ±10%,50/60 Hz
Current range
20-100A
Power...
Group: Air - plasma are sharp metals devices
In stock
The device of plasma cutting JACKLE Plasma 30-120 of air cooling, with step adjustment of current of cutting.
The mobile device of plasma cutting Plasma 30-120 of JÄCKLE firm (Germany) is used for air and plasma cutting of any conducting materials: steel, stainless steel, aluminum and its alloys,...
Group: Air - plasma are sharp metals devices
In stock
The device of plasma cutting JACKLE Plasma 30-60 of air cooling, with step adjustment of current of cutting.
The mobile device of plasma cutting Plasma 30-60 of JÄCKLE firm (Germany) is used for air and plasma cutting of any conducting materials: steel, stainless steel, aluminum and its alloys,...
Group: Air - plasma are sharp metals devices
In stock
Installation of air and plasma cutting Jasic CUT 70 is intended for economic use of working resources and time. By means of such powerful, small-sized unit it is very easy to make cutting as simple materials, and to cut out necessary details or their components. For reduction in a working condition...
Group: Air - plasma are sharp metals devices