UZS
Plasma sound pc 10051/t in Tashkent online-store OOO Center of Welding Technologies | Buy PLASMA SOUND PC 10051/T Tashkent (Uzbekistan) | OOO Center of Welding Technologies : Allbiz
Premium Business
Reviews: 2
OOO Center of Welding Technologies
+998 (71) 250-16-98

PLASMA SOUND PC 10051/T

PLASMA SOUND PC 10051/T
  • PLASMA SOUND PC 10051/T
  • PLASMA SOUND PC 10051/T
In stock
Brand:CEBORA
Country of manufacture:Italy
Shipping:
Description
Type Ardent cutting
Scope Industrial
Weight 34,0 kg
Width 297 mm
Depth 504 mm
Height 558 mm
Guarantee 12 months

The new three-phase PLASMA SOUND 100511T power supply for plasma cutting of metals represents the improved version 60611T.

The new three-phase PLASMA SOUND 100511T power supply for plasma cutting of metals represents the improved version 60611T.

Thanks to existence of a new torch of CP 161, the recommended thickness for the best quality of cutting and productivity is equal to 30 mm; the maximum thickness is 35 mm and extreme thickness - 40 mm.

The high coefficient of a running cycle at a continuous cycle (85a@100%) and faltering (95A@60%) and the speed of cutting is done by PLASMA SOUND PC10051fT by ideally suitable device for work in the automatic mode, and also for manual cutting on productions of the average importance.

  • Automatic system of verification of a phase (both at start, and in operating time), in order to avoid damage of installation at casual lack of a phase. Work with an arch on duty that allows to work at metals with paint and varnish or other covering.
  • The Post-gas function which cools a torch after switching off of an arch that promotes undervoltage of components and allows to increase service life of expendables.
  • The bridge scheme allows to reduce idling tension.
  • High electromagnetic compatibility according to the EN60974-10 standard that allows to use the device in close proximity to the electronic equipment (such as computers, PLK, etc.).
  • Ignition of an arch with high frequency that guarantees reliable excitement of an arch on duty and reduces hindrances.
  • The central fastening of a torch with the protection device for the prevention of casual contact with the parts which are energized.
  • Explosion-proof execution of the block of a reducer of air.
  • The function of automatic restart of an arch (Self Restagt Pilot) on duty chosen directly from the control panel and which automatically interrupts and restores an arch when cutting grids and lattices, increasing the operator's productivity.
  • Automatic the choice of tension between 208/220/230V and 400/440 of V.
  • Serial complete set: CP161 MAR torch length of a hose is 6 m

Conforms to the EN 61000-3-12 standard.

The power supply can be used from a power line of the diesel generator.

Extract from the table of cutting
Low-carbonaceous steel - Mild Steel
Current (A) Thickness (mm) Speed of cutting (m/min)
100 6 5.80
12 2.10
20 0.91
30 0.40
Low-carbonaceous steel - Stainless Steel
Current (A) Thickness (mm) Speed of cutting (m/min)
100 6 5.10
12 1.60
20 0.78
25 0.50
Aluminum - Aluminium
Current (A) Thickness (mm) Speed of cutting (m/min)
100 6 7.00
12 2.30
20 1.12
30 0.58
Characteristics:
Brand:CEBORA
Country of manufacture:Italy
Information is up-to-date: 01.03.2023

Read more

Unbelievable price on PLASMA SOUND PC 10051/T in Tashkent (Uzbekistan) company OOO Center of Welding Technologies.
Shipping method
LiveInternet